|
상세 정보 |
|||
| 애플리케이션: | 산업용 윤활제, 넥 몰드, 다이, 유리 몰드, 패리슨 몰드 | 유형: | 그리스, 압축기 오일, 화학, 32#, 기어 오일 첨가제 |
|---|---|---|---|
| 사양: | SAE,ACEA,기타,NSF,GB | 일반 구성: | 기유,첨가제,기유/첨가제,황유,특수용도유 |
| 제품명: | 재봉틀 오일, 산업용 헤비듀티 기어 오일 150, 진안왕, SKALN 모델 100# 고온 산업용 체인 윤활유, 산업용 윤활유 | 색상: | 갈색, 노란색, 명확하고 투명하고 흰색, 투명 |
| 포장: | 6PCS/Carton, 요구 사항, 맞춤형, 170KG / 드럼, 200L 배럴 | 형태: | 액체,콜로이드,공장 제작,반고체 |
| 품질: | 우수,상위 | 기능: | 마찰 감소, 기어 보호, 윤활성 증가 |
| 모습: | 유성 액체, 투명하고 무색 액체, 갈색 액체, 고체 지질 | 용법: | 재봉틀 및 관련 설비의 윤활 및 유지보수, 기계윤활, 선박, 자동차, 직물자수 |
| 포장: | 200 L/ 철 드럼, 플렉시탱크/드럼, 200KG/ 철 드럼, 50 L/ 배럴, 50 KG/ 배럴 | 용량: | 4L,200리터,100ML,13L |
| 특징: | 높은 보편성, 높은 인화점 점화 | 키워드: | 유압유, 재봉틀 윤활유 |
| 냄새: | 무독성, 맛도 없음 | 안정: | 증착 없음, 박리 없음 |
| API: | CF-4,GL-4/GL-5 | ||
| 강조하다: | L-HL 22 유압유,방청 산화 방지 유압유,방청 산화 방지 유압 작동유 |
||
제품 설명
Great Wall L-HL 22 anti-rust oxidation hydraulic oil is blended from highly refined mineral base oils with anti-oxidation, rust-inhibition, defoamant and pour-point depressant additives. It is classified as ISO VG22 under ISO 3448 and as HL under ISO 11158, i.e. a pure-mineral HH fluid with improved rust and oxidation protection.
The product is bright and clear with relatively low viscosity and good cold-flow behavior, mainly for low-pressure hydraulic systems, machine-tool power units and light-to-medium duty circulating lubrication loops, especially in winter workshops, outdoor cold-start equipment and low-resistance fast-response control circuits.
- Good cold start: VG22 low viscosity, kinematic viscosity not more than 300 mm²/s at 0℃, supports smooth pump suction and lower starting current.
- Strong oxidation stability: Suppresses sludge and acid-number rise, extending drain intervals compared with general full-loss machine oil.
- Outstanding rust and corrosion control: Protects steel, copper and other metals; rust prevention Procedure A passes, suitable for humid storage and between-process protection.
- Good demulsibility: Separates entrained water quickly to reduce valve sticking and filter blockage caused by emulsification.
- Balanced air release and foam control: Reduces cavitation, noise and sluggish response; suitable for machine tools and control loops.
- Seal compatibility: Compatible with common NBR and standard elastomers, lowering leakage and seal-swelling risk.
| Item | Specification / Typical | Note |
|---|---|---|
| ISO VG | 22 | ISO 3448 grade |
| Kinematic viscosity 40℃ | 19.8–24.2 mm²/s | Band center about 22 |
| Typical 40℃ viscosity | 22.0–22.6 mm²/s | Example, subject to batch COA |
| Kinematic viscosity 0℃ | ≤300 mm²/s | Cold pump-suction reference |
| Kinematic viscosity 100℃ | ≥4.10 mm²/s | High-temp retention reference |
| Viscosity index | Report (low/mid mineral example 95–98) | Per TDS |
| Pour point, max | −21℃ | ISO 11158 HL VG22 limit |
| Flash point COC, min | 165℃ | ISO 11158 HL VG22 limit |
| Recommended oil temperature | About 10–60℃ system temperature | Verify pump viscosity window |
| Suitable duty | Normal to cool, light/medium load, fast response | Machine tools, low-pressure units, circulation |
| Indicator | Rating | Visualization |
|---|---|---|
| Low-temperature fluidity | Very good | |
| Oxidation stability | Very good | |
| Rust & corrosion control | Excellent | |
| Demulsibility / water separation | Good | |
| Air release | Very good | |
| Foam resistance | Good | |
| Elastomer compatibility | Excellent |
| Item | Requirement / Typical | Method |
|---|---|---|
| Appearance | Bright, clear | Visual |
| Kinematic viscosity 40℃ | 19.8–24.2 mm²/s | ISO 3104 / GB T 265 |
| Kinematic viscosity 0℃ | ≤300 mm²/s | ISO 3104 |
| Kinematic viscosity 100℃ | ≥4.10 mm²/s | ISO 3104 |
| Viscosity index | Report | ISO 2909 / GB T 2541 |
| Flash point COC | ≥165℃ | ISO 2592 / GB T 3536 |
| Pour point | ≤−21℃ | ISO 3016 / GB T 3535 |
| Water | ≤0.025% or ≤250 mg/kg | ISO 6296/12937 / GB T 260 |
| Copper corrosion 100℃*3h | ≤1b/class 2 (report) | ISO 2160 / GB T 5096 |
| Rust prevention A, 24h | Pass (report) | ISO 7120 / GB T 11143 |
| Demulsibility 54℃ to 3 mL emulsion | Report, reference ≤30 min | ISO 6614 / GB T 7305 |
| Foam sequence I | Report, reference 150/0 mL | ISO 6247 / GB T 12579 |
| Air release 50℃ | Report | ISO 9120 |
| Mechanical impurities | None / report | GB T 511 |
- Low-pressure hydraulic systems: under the general L-HL position, typically below about 7–10 MPa and light-to-medium duty.
- Machine-tool hydraulic power units, auxiliary headstock lubrication, light-duty circulating oil loops and combined hydraulic/gearbox circuits.
- Winter workshops, outdoor equipment requiring cold start, low-viscosity control hydraulics with fast response.
- Not recommended as first choice for high-pressure piston/vane pumps with severe wear risk, silver-containing precision systems without confirmed corrosion data, or heavy gear-pump main circuits; evaluate L-HM/L-HV instead.
- Do not mix with anti-wear hydraulic oils, gear oils or unknown brands; flush the system before changeover and filter to the target cleanliness.
- Refill through dedicated filtration trolley; agree ISO 4406 cleanliness with system requirement.
- Store in a cool, dry place away from rainwater, dust and metallic debris; supply formats such as 170 kg steel drum or 16 L pail per actual offer.
- Before first fill, verify pump-allowed start-up viscosity, operating viscosity and maximum system oil temperature.


