Mobiltherm 605 Mineral Heat Transfer Oil Thermal Fluid Oxidation Resistance
Product Details:
| Place of Origin: | Jiangsu, China (ExxonMobil Taicang plant) for domestic supply |
| Brand Name: | Mobil |
| Certification: | ISO 9001 ISO 14001 ISO 45001 |
| Model Number: | Mobiltherm 605 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 10 drums |
|---|---|
| Price: | Get Latest Quotation |
| Packaging Details: | 4drums per pallet, stretch film wrapped |
| Delivery Time: | 5-8 business days after receipt of deposit |
| Payment Terms: | T/T,L/C,D/A,D/P |
| Supply Ability: | Up to 50 metric tons per week |
|
Detail Information |
|||
| Flash Point (COC), °C: | 230 | Key Performance: | Thermal Stability, Anti-Coking |
|---|---|---|---|
| Base Oil Type: | Mineral Oil | Kinematic Viscosity @40°C, Mm²/s: | 30.4 |
| Pour Point, °C: | -12 | Max Bulk Temperature (Closed System), °C: | 315 |
| Highlight: | FMobiltherm 605 Heat Transfer Oil,Thermal Stability Heat Transfer Oil,Thermal Fluid Oxidation Resistance |
||
Product Description
Mobiltherm 605 is a premium mineral-based heat transfer fluid formulated with highly refined base stocks. Designed for industrial closed forced-circulation heat transfer systems, it delivers excellent thermal stability and oxidation resistance with low coking tendency. Widely used as heat medium for indirect heating processes, it belongs to the Mobiltherm 600 series.
- Superior thermal & oxidation stability, resistant to thermal cracking at high temperature, minimizing sludge and coke formation to prevent heater & pipeline fouling, extending service life
- Good heat transfer efficiency, moderate viscosity for low flow resistance and stable heat exchange
- Good low-temperature fluidity for easy cold start and pumping
- Low volatility to reduce evaporation loss
- Anti-rust protection for carbon steel equipment, compatible with common seals for thermal oil systems
Tested per ASTM standards; complies with GB 23971 for organic heat carrier in China.
- Max bulk temperature: ≤ 315°C for closed systems; ≤180°C for open expansion tank systems. Film temperature can be 15~30°C higher than bulk oil temperature
- Typical industries: chemical reactors, rubber & plastic, timber, food drying, asphalt heating, textile, building materials and other indirect heating / cooling processes
- Not suitable: natural convection systems; continuous operating temperature above 315°C. Do not mix with other heat transfer oils without compatibility test
| Property | Mobiltherm 605 | Test Method |
|---|---|---|
| Density @15℃, kg/L | 0.857 | ASTM D1298 |
| Kinematic Viscosity @40℃, mm²/s | 30.4 | ASTM D445 |
| Kinematic Viscosity @100℃, mm²/s | 5.4 | ASTM D445 |
| Open Flash Point, ℃ | 230 | ASTM D92 |
| Pour Point, ℃ | -12 | ASTM D97 |
| Appearance | Pale amber clear liquid | Visual |
- System must be equipped with circulating pump to maintain flow rate and avoid local overheating. Inert nitrogen blanketing is recommended for closed systems to reduce oxidation
- Dehydrate and vent thoroughly during commissioning, heat up slowly to avoid steam surge
- Periodic oil analysis: viscosity, acid number, water content and carbon residue. Replace oil when parameters exceed limits. Service life varies with operating conditions
- Do not mix different brands or grades of thermal oil without compatibility test
- Compatible with NBR, FKM and common thermal oil seals
Packing: 18L/208L steel drum. Storage: Keep drums sealed in cool & ventilated warehouse, away from flame and heat. Avoid direct sunlight. Transport: Non-hazardous industrial oil. Prevent drum damage and leakage.
Avoid prolonged skin contact. Wear oil-resistant gloves and safety goggles. Do not inhale oil mist or ingest. Contain spillage with absorbent material; do not discharge into drains or soil. Waste oil is classified as HW08 waste mineral oil, recycle in accordance with local environmental regulations. Full safety information see SDS/MSDS.



