ISO VG 100 Heavy Load Film Fireproof Hydraulic Fluid HFDU Oil High Viscosity Index
Product Details:
| Place of Origin: | Chian |
| Brand Name: | Great Wall |
| Certification: | Q/SH PRD123—2011;ISO 12922 HFDU |
| Model Number: | Great Wall 4632 Synthetic Ester HFDU Fire-resistant Hydraulic Fluid N100 / VG100# |
Payment & Shipping Terms:
| Minimum Order Quantity: | 10 drums |
|---|---|
| Price: | Get Latest Quotation |
| Packaging Details: | 4drums per pallet, stretch film wrapped |
| Delivery Time: | 5-8 business days after receipt of deposit |
| Payment Terms: | L/C,D/A,D/P,T/T |
| Supply Ability: | Up to 50 metric tons per week |
|
Detail Information |
|||
| Product Type: | Synthetic Ester Fire-Resistant Hydraulic Fluid | Key Performance: | High Flash Point, High Viscosity Index |
|---|---|---|---|
| Fire Resistance Class: | ISO 12922 HFDU | Base Oil Type: | Synthetic Ester |
| ISO Viscosity Grade: | 100 | Environmental Compliance: | Biodegradable, Non-Toxic |
| Highlight: | ISO VG 100 Fireproof Hydraulic Oil,Biodegradable HFDU Hydraulic Fluid,High Load Biodegradable HFDU Oil |
||
Product Description
Great Wall 4632 synthetic ester fire-resistant hydraulic fluid N100 is formulated from specifically structured synthetic esters combined with anti-oxidation, rust-prevention, and lubrication additives. It is a non-toxic, biodegradable green fluid classified as HFDU under ISO 12922.
Compared with mineral HM/HV oils, it offers a higher flash point, higher viscosity index, and inherent fire resistance. Compared with phosphate ester HFDR fluids, it delivers similar lubrication performance, wider seal compatibility, and lower toxicity, and can serve as a replacement for phosphate ester fire-resistant fluid. N100/VG100 is the highest-viscosity grade in the 4632 range — providing a thick film and low internal leakage, suited for slow heavy-duty cylinders and high-temperature actuators. It is not intended for fast servo or cold-start priority systems.
- Fire resistance: High flash and fire point; passes the manifold ignition test; self-extinguishes on hot steel surfaces.
- High viscosity index (≥180): Stable hot viscosity and steady pressure under load.
- Heavy-load film: Synthetic ester lubricity exceeds mineral oil and water-glycol for piston pumps.
- Thermal stability: Shear-stable with low sludge formation and longer drain intervals.
- Material tolerance: Compatible with most metals and elastomers after verification.
- Biodegradable: Non-toxic with low aquatic impact compared to phosphate ester.
| Item | N100 Spec | Typical Ref | Note |
|---|---|---|---|
| ISO VG | 100 | — | ISO 3448 |
| Kinematic viscosity 40℃ | 90~110 mm²/s | Per batch COA | GB/T 265 |
| Kinematic viscosity 100℃ | ≥13.00 mm²/s | Per batch COA | GB/T 265 |
| Viscosity index | ≥180 | — | GB/T 1995 |
| Flash point COC | ≥270℃ | — | GB/T 267 |
| Fire point | ≥300℃ | — | GB/T 267 |
| Pour point | Per batch TDS | Low-pour series | N100 exclusive not published |
| Acid number | ≤3.0 mgKOH/g | — | GB/T 7304 |
| Manifold ignition test | Pass | — | SH/T 0567 |
| Seal compatibility | High-ACN NBR/FKM/PTFE; neoprene/EPDM/butyl verify | — | HFDU guide |
| Service temp | -20~135℃ (normal -20~90℃) | — | Great Wall 4632 |
| Max pressure | 40 MPa | — | Great Wall 4632 |
| Cleanliness | Filter to system requirement | — | — |
| Indicator | Rating | Visualization |
|---|---|---|
| Fire resistance | Very good (vs mineral) | ████░ |
| Flash / fire point | Excellent | █████ |
| Viscosity-temperature (VI≥180) | Excellent | █★★★★ |
| Heavy-load film | Excellent (top of range) | █████ |
| Anti-wear | Very good | █████ |
| Oxidation stability | Very good | █★★★★ |
| Biodegradable | Excellent | █★★★★ |
| Seal compatibility width | Wider (verify compound) | ████░ |
| Cold start / fast response | Medium (thicker than N68) | ██░░░ |
| Turbine EH servo | Low (not phosphate-EH) | ██░░░ |
| Item | Requirement | Method |
|---|---|---|
| Appearance | Clear | Visual |
| Kinematic viscosity 40℃ | 90~110 mm²/s | GB/T 265 |
| Kinematic viscosity 100℃ | ≥13.00 mm²/s | GB/T 265 |
| Viscosity index | ≥180 | GB/T 1995 |
| Flash point COC | ≥270℃ | GB/T 267 |
| Fire point | ≥300℃ | GB/T 267 |
| Acid number | ≤3.0 mgKOH/g | GB/T 7304 |
| Manifold ignition | Pass | SH/T 0567 |
| Specs | Q/SH PRD123—2011; ISO 12922 HFDU | — |
| OEM approvals | Wuhan Atlantic caster, CISDI material approval | — |
- Steel industry: Caster heavy clamps and lifts, blast furnace slow hydraulics, furnace breaker main cylinder, ladle turret.
- Metallurgy heavy-duty: Large piston-pump systems, hot-slab slow actuators, caster main cylinders.
- Power generation: High-temperature heavy auxiliary hydraulics, waste incineration large cylinders.
- Coal mining: Fire-risk heavy equipment (use MA-certified HFDU46/68 underground).
- Phosphate ester replacement: Verify compatibility and seals before changeover.
- Fast servo / NC hydraulics: N100 cold viscosity slows response; use N32/N46 instead.
- Turbine EH servo: Use HFDR phosphate ester; 4632 is not designed for EH resistivity specifications.
- Cold-region outdoor prime grade: Pour point per batch TDS; prefer N32/N46 for cold start.
- Replacing mineral oil: Residual mineral must be <5%; flush tank and lines, change filters.
- Replacing water-glycol: System water must be <0.2%; keep water out.
- Replacing phosphate ester / other ester: Run a compatibility test and check seals.
- Seals: High-ACN NBR usable after verification; prefer FKM/PTFE; neoprene/EPDM/butyl per seal manufacturer guidance.
- Metals / paint: Avoid lead/zinc/cadmium parts and zinc coatings; verify tank paint compatibility.
- Temperature: Tank ≤60℃ preferred; normal range -20~90℃; 120℃ limit is not continuous.
- Do not mix with mineral HM/HV, HFC water-glycol, or HFDR without a compatibility check.
- Drain old oil, flush with 4632 or an approved cleaner, and replace filter elements.
- Store sealed, dry, and dust-free; available in 200L drums (170kg).
- In service, check viscosity, acid number, water content, and contamination; confirm same-brand top-up compatibility.
- Verify pump viscosity window and seal compound before first fill; no "OEM original replacement" claim is made.


